
Tokistar Lighting

home \| systems \| leds \| gallery \| downloads \| news \| company \| agents \| contact

Trillium | Products

Trillium’s flexibility and compact profile are ideal for outlining complex shapes in tight spaces. Color is easily changed or animated to complement any environment or theme. Trillium operates efficiently at 8 VDC. This lower voltage produces very little heat and adds to the system’s reliability. Trillium is cool to the touch and can be specified for applications where it may be subject to direct contact. Trillium Channel is available for use in direct-view applications.

Planet Hollywood - Las Vegas

Basic System

Trillium’s most flexible form is available in LED module spacings of 2”, 4”, 6” and 12” on center.

Mounting Options

Trillium can be surface mounted to structures using our mounting track, panel fasteners or clamps.

Mounting Track
Part #: TRI-MT LED modules snap into a semi-rigid track. The track is fastened with screws, hi-bond adhesive tape or construction adhesive.

Panel Fasteners Part #: TRI-PF Trillium is easily incorporated into display panels and signs with our panel fasteners. The LED module is inserted from behind, concealing all wiring.

Mounting Clamps Part #: TRI-MC For maximum flexibility, Trillium can be attached with clamps. Each clamp is fastened with a screw concealed behind the fixture.
		^

Trillium Channel

A satin aluminum channel is available for straight runs. Custom finishes are available on request.

Power Supplies

LED Driver
LDR8-40

Tokistar’s LDR8-40 is a 40 Watt UL Recognized Class 2 LED Driver used to convert an AC input into an 8 VDC output. It may be operated from a wide range of input voltages. The enclosure is suitable for wet locations.

Part #: LDR8-40

Specifications
Input Range: 100-240 VAC
Frequency Range: 50/60 Hz
Output: 8 VDC (Adjustable +10% / -25%)
Max. Output Current: 5.0A
Max. Output Power: 40W
Protection: Overload, Overcurrent, Short Circuit
Operating Temperature: -30ºC to +60ºC

Mechanical Specifications
Dimensions: 3” x 9.75” x 2”
Weight: 1.94 lbs
Enclosure Rating: Nema 3/IP65

Mounting: Flange Mount
Connection: Knockouts for 1/2” Conduit

Compliance/Safety
Standards: UL Recognized Class 2/EN60950

LED Capacity
0.32 Watt LEDs: 125 pieces

LED Driver
LDR8-80

Tokistar’s LDR8-80 is a dual output Class 2 LED Driver with two independent 40 Watt outputs. It may be operated from a wide range of input voltages. The enclosure is suitable for wet locations.

Part #: LDR8-80

Specifications
Input Range: 100~240 VAC
Frequency Range: 50/60 Hz
Output: 8 VDC (Adjustable +5% / -30%)
Max. Output Current: 10.0A (2 @ 5.0A)
Max. Output Power: 80W (2 @ 40W)
Protection: Overload, Overcurrent, Short Circuit
Operating Temperature: -30ºC to +60ºC

Mechanical Specifications
Dimensions: 3.6” x 11” x 2.25”
Weight: 4 lbs
Enclosure Rating: Nema 3/IP65
Mounting: Flange Mount
Connection: Knockouts for 1/2” Conduit

Compliance/Safety
Standards: UL Recognized Class 2/EN60950

LED Capacity
0.32 Watt LEDs: 250 pieces

Lighting Controllers

Color Mix System

Our economical Color Mix System is capable of being operated on demand. Each dimmer pack operates up to 125 Trillium LED modules. CAT5 cable with RJ45 connectors on each end link the components together. Up to 25 dimmer packs may be connected in series if the total length of all CAT5 cable does not exceed 165 feet from the LC-3CH-CM control station to the last dimmer pack. CAT5 cables are included with units.

Color Mix features include:

• Cross-Fading, Fading, Flashing and Demo Mode
• Ten memory locations to mix and store your favorite color selections
• Six animation patterns which cycle between favorite color selections
• Rotary dials for precise color mixing/speed-rate adjustment
• Adjustable fading/flashing rate
• Control station includes color-changing LED indicator

Control Station (Part #: LC-3CH-CM)

The Control Station is provided with a 50 foot CAT5 cable. Power to this unit comes from the LED Driver powering the first dimmer pack. The unit installs in a double-gang junction box.

Dimmer Pack (Part #: LC-3CH-DP)

Each dimmer pack is provided with a CAT5 cable and capable of operating up to 125 LED modules (40 Watts maximum). Dimensions: 1-1/2� x 3-1/2� x 4-1/16�

DMX Dimming
	Part #: LC-3CH-DMX Max. Load: 40 Watts @ 8 VDC Environmental Rating: Dry Location/IP20 Dimensions: 3/4� x 1-3/4� x 3-1/2� Weight: 50g / 0.11 lbs Listing: ETL Listed/CE Certified Operating Temperature: 0~+50�C
DMX Dimmer Packs are capable of operating up to 125 each 0.32 LEDs (40 Watts maximum). Dimmer Packs are addressable, and may be used with any controller working on DMX protocol. Up to 36 Dimmer Packs can be linked together with Data Cable. For applications exceeding 36 Dimmer Packs, a Splitter is required. Splitters can operate an unlimited number of Dimmer Packs. Consult factory for details on Splitters.