Three key considerations in specifying an Exhibitor Lighting System are:
1) Socket Spacing
Consider viewing distance and perspective when deciding on socket spacing. Wider spacings (18”-24”) are the best choice for most festooning applications. Closer spacings (6”-12”) are appropriate for applications at closer viewing range.
2) Light Source
LEDs create a softer lighting effect and are the most energy-efficient choice. Since LEDs consume so little energy, they can run much greater distances from a single feed point. Xenon lamps will produce brighter distinct points of light.
3) Globe Selection
Clear globes have excellent clarity and will emphasize the distinct points of incandescent or LED light. Frosted globes will diffuse light on their entire surface. Colored globes in combination with xenon lamps create vibrant color.
Exhibitor Series can be surface mounted to structures using our mounting disks or straps. For festoon applications, our wire rope adaptor securely holds each socket in place to 1/16” or 1/8”ø wire rope.
Surface Mounting Using Disks
Part #: EX-MD-WH (White)
Part #: EX-MD-BK (Black)
Mounting Disks attach with screws.
Exhibitor fixture snaps directly into the Mounting Disk and locks in place.
Surface Mounting Using Straps
Part #: EX-MS-WH (White) Part #: EX-MS-BK (Black)
Mounting Straps attach with screws.
Festoon Applications with Wire Rope Adaptors
Part #: EX-MDA-WH (White) Part #: EX-MDA-BK (Black)
To minimize voltage drop and keep conductors safely within their ratings, do not exceed the maximum lengths shown for each independent fixture.
